Cutting plate and pipeline integrated water cutting machine, one waterjet cutting machine, You can cut both pipe tube and plate material

1 years guarantee of the whole machine and we give lifetime maintenance free of charge.
Free training to make sure you master the operating of machine at our factory.
24 hours online services through Whatsapp, Skype, Email or on the phone.

HEAD 420MPa exchange hydraulic booster 37Kw high pressure pump

Advantages of Cutting Metal with Waterjet:
No material deformation caused by heat
No hardening of the material along the cut edge
No changes to the metal structure
No heat affected zones (HAZ)
No hazardous fumes or vapors

Direct Waterjet Cutting Drive Pump
1.Type of pressurization is direct drive
2. Control way: operate by the touched screen and control by PLC
3.Max. water discharge is 20 L/min
4.Max. diameter of orifice is 1.19mm
5.Max. operating pressure is 50MPa
7.Power requirement : 22 KW( Can also be customized，380V/50HZ use servo motor as the main motor
8. No need outside cooling device, with the auto fun as cooling system

5 axis cutting head enables operators to cut bevels and mitre cuts up to 45 degrees. provides the option to activate a "taper compensation" setting which offsets the taper in the water stream to accurately achieve the desired angle.