Share to:

HEAD Waterjet Cutting Machine

5 0 Reviews
HEAD Designed Specifically Waterjet Cutting Metal Machine
Quantity:
  • HEAD2030BA
  • HEAD
  • 84649011

waterjet cutting machine

Structure :

²  It adopts imported supercharger parts and adopts single-cylinder two-way reciprocating plunger structure with advanced structure, reasonable and high stability. Guarantee long-term pressure output is strong and stable.

²  Equipped with Siemens (Beide) three-phase AC asynchronous motor.

²  The hydraulic pump is an automatic variable pump, which uses remote pressure control to improve the high-pressure water supply capacity through the low-pressure water pump to maximize the system efficiency. While ensuring long-term working efficiency, the oil temperature rises slowly and is suitable for long-term stability work. Control cabinets are installed in all directions to facilitate equipment maintenance and overhaul.

²  Plate heat exchanger, high heat exchange ratio, good heat transfer effect, control hydraulic oil temperature within the specified range.

²  Secondary water filter, the filter element is made of imported industrial filter from Japan, and it is made by melt-blown production process. Minimize damage to high-pressure components such as high-pressure seals and nozzles by minimizing impurities in water.

²  Equipped with Japanese Omron PLC control.

²  Equipped with inlet reversing valve, relief valve and cartridge hydraulic valve.

²  In order to protect the motor from excessive current during start-up, this high-voltage generator uses a star-delta start, so that the power system does not have to withstand unnecessary high loads. It has a slow start function and a low-voltage mode to automatically reduce pressure and noise during start-up.

²  Equipped with imported high-pressure pipeline to improve pipeline running time

²  With low pressure water shortage automatic protection function (high pressure pump automatically suspends operation when water inlet pressure is low)

²  Use stainless steel water pump for secondary water boosting, insufficient water supply automatic alarm and protection function to avoid damage to the machine due to lack of water or water source under pressure and impact on work performance.

²  With low-pressure drilling and high-pressure cutting function, it can realize automatic conversion of high and low pressure.

²  Rotary oil filter provides guarantee for continuous operation of the machine.



Maximum pump flow

107L/min

Maximum flow of high   pressure water

3.7L/min

Maximum available water   nozzle diameter

0.33mm

Highest pressure

420MPa60000psi

Continuous cutting pressure   interval

50-380MpaCan be set by yourself

main motor power

37KW50Hp

power supply

380V/50HZ

Accumulator capacity

1.2L

Maximum cutting thickness

100mm

HEAD waterjet cutting platform(HEAD2030BA)

waterjet cutting machine

l  Adopting gantry structure, beautiful appearance, reasonable structure design, good rigidity and stability, uniform force, stable, accurate and safe operation

l  The machine bed and the load-bearing platform adopt a split structure, so that the long-term force change of the load-bearing platform does not affect the accuracy of the machine tool.

l  The X-beam of the cutting platform is made of aluminum alloy with one-time extrusion molding, which is light in weight, strong in steel and non-deformable. It is the most advanced technology in water cutting machines.

l  Adopting ABBA ball screw and linear guide in Taiwan to ensure transmission accuracy, durability and high quality/

l  The integrated dust-proof folding structure and the Y-axis towline adopt a built-in structure, which can greatly improve the service life of the machine tool and reduce the maintenance and post-maintenance costs. Adopting the most popular design concept in the world is the development direction of water cutting machine.

l  High quality pallets and special cables for durability and reliability

l  The connection between the drive motor and the ball screw is directly connected by a flexible coupling. Compared with other torsionally rigid couplings, it has the advantage of positive and negative absorption vibration, and the transmission accuracy is higher.

l  Overtravel automatic limit and soft limit double protection

l  The main structural parts of the Y-bed are made of casting structure and concrete structure. After the metal part is aged, it is processed by gantry planing and guide rail grinding to eliminate trace deformation and maintain mechanical precision for a long time.

l  Z-axis with double rails and 4 sliders for maximum accuracy and practicality

l  Electronically controlled intelligent automatic lubrication system ensures the transmission accuracy and service life of the screw and guide rail

Structure type

Gantry type

working desk size

2100mm×3100mm

Effective processing range

2000mm×3000mm

Z-axis travel

150mm

Transmission speed

6000mm/min

control precision

±0.01mm

Cutting accuracy

±0.1mm

Repeatability

±0.05mm

           Sand control system

l  The new pneumatic valve is sensitive and reliable, overcomes the simple way of controlling the amount of sand by relying on negative pressure, and fundamentally solves the problems of sand blocking and sand breaking.

l  Reliable anti-backwater design and accurate sand control panel avoid the problems of abrasive wetness, sand blocking and sand breaking caused by the backwater of the cutting head, ensuring the continuity of various cutting states and precise control. The amount of abrasive can effectively reduce the waste of abrasive. This item is also standard on Hyde equipment.

   Automatic sand feeder

waterjet cutting machine

l  The automatic sand feeding system developed by HEAD provides the water cutting machine with the function of storing sand and automatically transferring the abrasive to the CNC working platform, which fully reflects the automation degree of HEAD waterjet. This is the standard configuration of HEAD waterjet series products.

l  No need for electronic control, easy to operate, reliable operation, maintenance free

l  150 liters of volume provides the amount of sand needed for 8 hours of continuous cutting

l  The compressed gas pressure required during work is less than 0.2Mpa, the sand volume is uniform, and the conveying is stable.

l  Ingenious air intake at the upper and lower ends to ensure uniform output of sand and no sand blocking



High precision AC five axis water cutting head, the high reliable absolute value encoder servo motor can be started without the origin switch, which saves the time of returning to the origin and reduces the mechanical failure of the whole machine. Precision 3D workpiece cutting can be achieved by using high precision and reliable speed reduction mechanism with positioning accuracy of 1.5arcmin

waterjet cutting machine

2

>>>Brief Introduction Of HEAD waterjet company

HEAD water jet is an independent technology research and development, high-tech, promote high-quality, high credibility of the focus on large-scale ultra-high pressure water cutting machine manufacturer. Has been engaged in water jet cutting research, manufacturing, is one of the most professional water jet manufacturers in the stone parquet, glass parquet, metal shaped cutting, aerospace, military and other fields of research and manufacturing. We are a manufacturing and trading combo for water jet cutting machine in Liaoning China, with more than 15 years full experience and a professional sales team.HEAD water jet, so cutting is no longer a problem!

Quality and credit goes all the way. HEAD , a company surviving fierce market competition, has very strong national culture, and develops shoulder by shoulder with the world and this Era. We are determined to achieve our dreams step by step with the advantages of high technology. 

waterjet cutting machine

>>>Try to Read This -------Our Service

1. Maintenance free of charge for 12 months .
2. We will provide the consumable parts at an agency price. 
3. 24 hours online service, free technical support.
4. Machine has been adjusted before delivery, operation disk is included in the delivery. If there is any other questions, pls kindly tell me.
5. We have manual instruction and Videos for software Installation, operation and machine's using and maintenance; We will send professional technician to customers' factory, provide them two-weeks training,including working principle of machine, Auto CAD drawing, common problems and solution, etc.

阿里用售后服务

>>>Try to Read This -------FAQ
Q1: Does This Machine Pass CE Certificate? 
A2: Yes, this machine passed European CE certificate and meet Safety Standard.
Q2: How much of cutting thickness?
A2: Marble is 0-120mm; granite is 0-110mm; tiles are 0-40mm; glass and mosaic is 0-80mm; steel, stainless steel, copper is 0-60mm; aluminum is 0-80mm; plastic, acrylic, foam is 0-200mm. With our double-pressures system, it can cut 0-160mm steel sheet, 0-200mm stones. It is good for customers cut thicker materials.

waterjet cutting machine

Contact Us

Address:NO.110-3,Hongrun Road, Yuhong District, Shengyang City
Phone:  +8613079294501
Mobile:  024-31063117
QQ:  719185382
E-mail:  sale2@hdwaterjet.com
As Head has a strong research and development, production sales and service team, Shenyang Head Science and Technology Co.,Ltd has become well-known enterprises in waterjet field.

QUICK LINK

CONTACT

Add:NO.110-3,Hongrun Road, Yuhong District, Shengyang
City
Tel:024-31063117
Phone:+8613079294501
E-mail:sale2@hdwaterjet.com
Other languages: Pусский Español 

Copyright © 2018 Shenyang Head Science & Technology Co.,Ltd All rights reserved. Sitemap