jet cutting machine

Waterjet technology produces excellent fine-feature cut quality with low edge angularity, no heat-affected zone, a narrow kerf, and virtually dross-free cutting. It also offers the ability to process a variety of materials and a thickness range capability unmatched by other cutting technologies.

Cutting plate and pipeline integrated water cutting machine, one waterjet cutting machine, You can cut both pipe tube and plate material

1 years guarantee of the whole machine and we give lifetime maintenance free of charge.
Free training to make sure you master the operating of machine at our factory.
24 hours online services through Whatsapp, Skype, Email or on the phone.

HEAD 420MPa exchange hydraulic booster 37Kw high pressure pump

The cutter head inclined at an angle in any direction,eliminating the phenomenon f concave convex and uneven cutting surface(to eliminate phenomenon of small surface and large bottom).To make the front junction smaller, reduce grinding link,can tile diretly.Reducing the polished and the production cost greatly.
2. Make the complex graphics more delicate and beautiful.
3. It turning without pause,no turning dot,make cutting speed faster.The cutting surface roughness wil not affect the collage

Advantages of Cutting Metal with Waterjet:
No material deformation caused by heat
No hardening of the material along the cut edge
No changes to the metal structure
No heat affected zones (HAZ)
No hazardous fumes or vapors

Direct Waterjet Cutting Drive Pump
1.Type of pressurization is direct drive
2. Control way: operate by the touched screen and control by PLC
3.Max. water discharge is 20 L/min
4.Max. diameter of orifice is 1.19mm
5.Max. operating pressure is 50MPa
7.Power requirement : 22 KW( Can also be customized，380V/50HZ use servo motor as the main motor
8. No need outside cooling device, with the auto fun as cooling system